Whether for new buildings or during renovation work: You will get dry walls with the dehumidifier from MSW. With the dehumidifier, you prevent mould from forming on damp walls, which would result in costly rework. In addition, you can start follow-up work such as plastering or painting much earlier thanks to your dry walls. With continuous operation, the dehumidifier removes up to 90 Litres of moisture per day that would otherwise accumulate in the walls. The highest efficiency is achieved at a room temperature of 38 °C and a humidity of 90 %. The unit circulates up to 1129 m³/h of air and cools it with the help of the powerful 1300 W compressor. For this purpose, the unit uses the coolant R290, which is extremely environmentally friendly. The condensed liquid then drains off via a hose. The room dehumidifier is perfectly suitable for 150 m² areas. The industrial dehumidifier is equipped with an LED display that you can set and check all the required values. Use with a 24 h timer. In addition, the building dryer has an automatic switch-off function. The integrated defrost function allows you to dehumidify down to 5 °C. In addition, the unit starts automatically if the humidity in the room is too high. A sensor display informs you of errors so that you can react appropriately. You can easily remove the built-in air filter and wash it for repeated use. Want to move the unit? You can do this easily and comfortably with the wheels and practical handle. This makes the commercial dehumidifier suitable for larger construction sites or drying several rooms. Please note: If any damage to the dehumidifier results from improper transport or incorrect handling, you will be responsible for the costs of assessing the damage, as well as for any repair or replacement. To help you avoid unnecessary costs, please keep the following points in mind: • Always use the original packaging or equivalent protective materials for transport.• Avoid strong impacts or any mechanical damage when handling the device.• Ensure the device is only operated at an ambient temperature of at least 19 °C.• Follow the manufacturer’s instructions carefully for setup and operation. If we accept your warranty claim, we will of course cover all associated costs. However, if the damage has been caused by improper transport or unsuitable conditions, we kindly ask for your understanding that you will be responsible for the costs of assessment, repair, or product replacement. Thank you for your understanding. Should you have any questions, our team will be happy to assist you at any time. The expondo Customer Service Team